Skip to main content

6 Ways to Get Maximum Gain from RSI Indicator

Trading community de facto applies RSI indicator to define levels of overbuying/overselling levels on market. Even without use of additional filters, indicator works good. Have a look on applying RSI that even more increase accuracy of the indicator.
Standard way to apply RSI:


RSI signals
RSI signals

The first, traditional way – buying option at the moment when RSI exits the zone of overbuying/overselling.
  • when the value of RSI line gets lower than overselling level of 30% usually, bears force weakens and that means, the exit of an indicator from this zone is the right time to open position for raising;
  • when values get higher than overbuying level of 70% usually, one needs to consider variants of entering on downturn.
Buying option is an operation strictly to be provided only by the moment when indicator exits overselling/overbuying zone.

RSI on minor timeframes

2nd way. If you trade turbo options or binaries with expiration time less than 30minutes, 70 and 30 levels not always allow to execute accurate enterings. Period should be decreased for indicator to reach its extreme values more frequent. For timeframe less than hour one may usel RSI equals 5 and 90 to 10 or even 95 to 5 levels.
Example of setting Rsi to 90/10 and 5 period:


RSI with 5 period
RSI with period of 5 on 1 minute chart

3rd way. For additional approval you need to pay attention on higher period in order to see the global trend. Trading binary options opposing the trend is the bad idea, thus signal direction on current timeframe and one above must match together.
That is how signal approve looks on 1 minute and 5 minute charts:


Signals on various timeframes
RSI on longer timeframe M5 approves signal on chart M1

Period and levels of RSI should match together on both charts.
4th way. There is scalping technique for supershort deals. This trading method is being frequently applied by american traders. The feature of the strategy is to get large amount of signals during a small period of time. The main goal is to absolutely minimize response time of an indicator.
Settings:
  • RSI period equals 2 bars;
  • Overbuying limits are also set maximally possible – 99 for overbuying and 1 for overselling.
As usual, this strategy is used on chart M1 or M5. Expiration time of binary option usually does not exceed 5 minutes.


Skalping with RSI
Setting RSI for scalping

RSI Divergence

5th way – searching for divergence on chart is an effective method of getting RSI signals. Divergence is a dissimilarity between chart and indicator values, for example when the chart draws higher and indicator shows lower maximum.
The example of divergence – two maximums on chart are on the same level while on the indicator chart the second maximum is much higher:


RSI Strategy Divergence
RSI Divergence

The thing to remember – you need to trust exactly what indicator shows, if it grows – we buy option CALL, if it decreases – PUT.


RSI divergence types
RSI divergence types

The example of entering the position on the basis of RSI divergence:


RSI divergence
entering the position on the basis of RSI divergence

RSI & Bollinger Bands

The last, 6th way – to combine RSI indicators and Bollinger Bands,  because the first one shows impulsive movements and the second shows the main direction of market movement. As a result we get very precise signals on entering the position.
The rules of trading on RSI are fairly standard. Purchase PUT option by the time indicator line exits the overbought zone, or CALL option, when indicator line exits the oversold zone. But one should enter only in case the price is situated near the bottom line of Bollinger Bands, which should act as a filter. Ideally, the price should exactly overcross the line by the moment of receiving RSI signal.
In case of Сall signal, the price of opening the breakout candlestick should be above the line. The closing price above:


Bollinger and RSI Strategy
СALL signals with Bollinger bands filter

All the same is true for PUT-signal, in this case the price therewith should simultaneously cross the top line of a channel – Opening price higher, closing price lower (inside the channel):


PUT RSI + Bollinger
PUT signals with Bollinger bands filter

The expiration time may vary depending on used timeframe. Ideally, the expiration time should be equal to quantity of bars needed to achieve the floating average (average line of the channel) from the edges of the channel. One may calculate the average quantity of bars needed to pass the distance from one edge to another and divide it by 2.
Conclusion 
The most famous and widespread indicators are able to become the basis of profitable trading strategy if one uses it properly. We discussed several simple ways of increasing the percentage of succesul deals through the traditional RSI strategy. Try to use these methods on free practice online trading.
Traditional indicator have become so merged into the trader’s lives, that many just don’t consider them as the serious trading instrument. At the same time, the majority of more up-to-date developments are based on the same RSI or floating averages. The primary benefit of RSI is its versatility, this indicator might be used on currency pairs, trade stocks or goods with equal success and without loss of quality.
Try For Free
NOTE: This article is not an investment advice. Any references to historical price movements or levels is informational and based on external analysis and we do not warranty that any such movements or levels are likely to reoccur in the future.
In accordance with European Securities and Markets Authority’s (ESMA) requirements, binary and digital options trading is only available to clients categorized as professional clients.

GENERAL RISK WARNING

CFDs are complex instruments and come with a high risk of losing money rapidly due to leverage.
77% of retail investor accounts lose money when trading CFDs with this provider.
You should consider whether you understand how CFDs work and whether you can afford to take the high risk of losing your money.

Comments

Popular posts from this blog

8 Risk Management Tips from the World’s Top Traders

When it comes to trading, a lot of people believe that the most important skill you can get is  making more money , when in reality (according to more experienced traders) it is  not losing what you already have . After all, even Warren Buffett, the world’s third richest man and an investment icon, believes that your #1 rule as a trader is to never lose money. This article is the collection of 8 quotes by renowned investors that might  help you better understand the nature of financial risks and manage your losses. This knowledge is important as  it could help you stay in the game when everything seems to be against you  (because, as you know, you could lose all of your money and your trading would suddenly end). “I’m always thinking about losing money as opposed to making money. Don’t focus on making money, focus on protecting what you have.” — Paul Tudor Jones “The elements of good trading are: (1) cutting losses, (2) cutting losses, and (3) cuttin...

John Murphy’s Laws of Technical Trading

John Murphy is an icon of technical analysis and a talented book writer. This article is a collection of his recommendations to new traders. 1. Map the trend The trend is not always easy to spot. Sometimes you have to find it using various technical analysis tools. What may seem like a flat movement in the short run can turn out to be a trend in the long-run. Even if you trade on shorter time frames, it may be beneficial to  understand the general picture and act accordingly . This method can also help when getting rid of the price noise. What may seem like a flat market on shorter time frames can turn into a trend on longer ones 2. Draw the line As soon as you determine the trend direction,  mark the trend with (support/resistance line) a line or two (the so-called price corridor) . The line should connect the dots on the price chart. A downtrend is a series of lows that get lower as the time passes. An uptrend, on the contrary, is a collection of highs that get hig...

Learn to Understand Quotes Better

Have you ever been confused by the quotes that are used when you open and close the deals? If you ever wondered why the deal was opened above or below the line that you see on the chart, this article is for you. Let’s make it clear once and for all! Bid and Ask First of all, it is important to know about the basic Ask and Bid prices. Ask price is the price at which you buy the asset. Bid is the price at which the asset is sold.  Ask and Bid quotes are the quotes at which you open your CFD-type deals on the IQ Option platform.  The difference between Ask and Bid prices is called Spread. You may enable the visibility of Ask and Bid quotes in the settings menu and this is what it will look like: So how does it work? Let’s look at an example. Let’s say you open a deal on GBP\NZD, under the Forex tab. You make a prediction that the price will go up and open a <Long> position by clicking <Buy>: The deal is opened at the level of the current <Ask>...